SurfaPaint Stone Varnish WB



Premium quality stone & concrete varnish for stain protection


SurfaPaint Stone Varnish WB
SurfaPaint Stone Varnish WB is a high quality nano-polymer, filming varnish for the decoration and protection of stone, concrete, brick or other porous substrates.
Key Benefits
  • Protects against stains from water, oil, acids and foods
  • Reduces dirt pick up
  •  Prevents the penetration of water
  • Excellent weathering resistance
  •  Multiple coatings provide a satin or glossy appearance
  • Easy to apply.
Surfaces Flamed or rough marble, stone, cotto, cement tiles, stamped concrete.
Application Note Surface Application: The application surface should be dry and clean. Remove flaking and loose material from the application surface. Any oily residues must be removed from the application surface. Many failures attributed to poor surface preparation. Apply 1-2 coats for a satin finish or 3 coats for gloss finish.

Application method: Brush, spray or roller. Recoating time: 2 hours. Touch dry time: 60min. Application temperature: 5-35oC. It is recommended the modified surface not to be exposed to extreme weather conditions for 4-5 days after application.

Coverage: 8-10 m²/L, depending on the porosity of the substrate.


Additional information


Dust & Dirt Pickup, Oil, Stain, Water


Cement, Gypsum Boards

Area of Application

Exterior, Floor, Interior, Wall


There are no reviews yet.

Be the first to review “SurfaPaint Stone Varnish WB”

Your email address will not be published. Required fields are marked *