Impregnation Stain Varnish for wooden surfaces.
|SurfaPaint Wood Stain IF|
|SurfaPaint Wood Stain IF is a high quality, water-based, clear or colored impregnation stain varnish with high flexibility and excellent adhesion and Rub and scratch resistance and contains no harmful biocides.|
|Surfaces||Absorptive and sensitive natural wooden surfaces such as doors, windows, frames, claddings, fences/posts, roof shingles, garden furniture/sheds, pergolas, deckings & docks.|
|Application Note||Surface Application: SurfaPaint Wood Stain is ready to use. Stir well before use. Brush thinly and evenly working varnish well into the grain. Maintain a wet edge when painting. Thick coats wrinkle when dry. Avoid bubbles. Apply 2 coats for good protection and 3 coatings for excellent protection which may then also increase the color depth. Do not over-brush. Lightly sand between coats if necessary with fine sandpaper. Do not apply SurfaPaint Wood Stain if another wood stain or varnish product has been already applied and not adequately removed.
Preparation: Surfaces must be clean, dry and rubbed down with a suitable abrasive paper (in case of unpainted surface). Use methylated spirits to remove oil excess, especially from tropical wood (e.g. teak wood).
Drying Time: 3-4 hours after the previous application.
Coverage: 10-12 m²/L